Features
Specifications
| SPECIFICATIONS | ||||
| OUTPUT | ||||
| Model | SCN-1500-12 | SCN-1500-24 | SCN-1500-27 | SCN-1500-48 |
| DC Voltage | 12V | 24V | 27V | 48V |
| Rated Current | 125A | 100A | 62.5A | 32A |
| Current Range | 0-125A | 0-100A | 0-62.5A | 0-32A |
| Rated Power | 1500W | 1500W | 1500W | 1536W |
| Ripple & Noise | 120mVp-p | 150mVp-p | 240mVp-p | 480mVp-p |
| Voltage Adj. Range | 10.8~13.2V | 20~26.4V | 24~30V | 41~56V |
| Voltage Tolerance | ±5% | ±5% | ±5% | ±5% |
| Inlet Stability | ±1% | ±1% | ±1% | ±0.5% |
| Load Stability | ±1% | ±1% | ±1% | ±0.5% |
| Setup,Rise Hold Up Time | 800ms, 50ms, 16ms at full load | |||
| INPUT | ||||
| Voltage Range | 200～260 VAC 47～63 Hz；290～370VDC | |||
| AC Current | 12A/230VAC | |||
| Efficiency | 83% | 84% | 85% | 87% |
| Inrush Current | 120A/230V | |||
| Leakage Current | <3.5mA/240VAC | |||
| PROTECTION | ||||
| Over Load | 110%~135% Type: plusing hiccup shutdown Reset:auto recovery | |||
| Over Temp. | RTH>=80 output shutdown | |||
| ENVIRONMENT | ||||
| Working Temp., Humidity | -10℃~+60℃(Refer to output derating curve),20%~90%RH | |||
| Storage Temp., Humidity | -20℃~+85℃, 10%~95%RH | |||
| Temp. Coefficient | ±0.03%/℃(0~50℃) | |||
| Vibration | 10~500Hz,2G 10min,/1cycle,Period for 60min,Each X.Y.X axes | |||
| SAFETY | ||||
| Withstand Voltage | I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | |||
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC | |||
| STANDARD | ||||
| Safety Standard | Design refer to UL1950,CSA22.2,IEC60950 | |||
| EMC Standard | Design refer to FCC Part 15 Class A | |||
| OTHERS | ||||
| Dimension | 280*178*125mm(L*W*H) | |||
| Weight | 11Kg | |||
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. | |||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. | ||||
| 3. Tolerance: includes set up tolerance, line regulation and load regulation. | ||||
| 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | ||||
